Control of induction motors Induction motors are commonly used for conversion of electrical energy into mechanical energy. According the control of these sweet and q
Wind turbines Wind turbine converts the energy of the wind into mechanical energy, which is then transform to electric power by the rotating turbine blades.
Phase shifters electromechanical devices with considerable inertia we’re used to maintain its phase shift between the voltage and in power transmission speed of page 16
Multilevel converters structures order to have Hai nominal voltage of converter it is necessary to connected switching device in studies at the same time the
Parallel connection of inverters As already noted it is more difficult to ensure your parallel operation of AC modulus because that entire there voltage is
Zero voltage switching with an input resonant circuit One method of switching 80 voltage in an inverter is to create a voltage with high -frequency
Converters of class E converter was connected to a DC sources through reactor whose inductance ensure the properties of a current source at the input.
Continuous current mode:- In this case, the current ic will be inductive and will lagthe fundamental component of the circuit voltage as shown in figure.
Resonant converters In resonant converters, circuit are used to reduce this switches in power losses reassigned circuit were first used in thyristor converter in which
Balancing of current in a three- phase system. When the load contains single -phase consumers, unbalanced phase current appears in three -phase power systems. That